Inverter Lights and Error Codes
What common inverter status lights usually mean and how to report an error to a technician.
1 min read · Educational information, not legal or financial advice
Most wall-mounted inverters and microinverter gateways have status lights or a small display. Colors and codes vary by brand, but these patterns are common.
| Light | What it often means |
|---|---|
| Solid green | Producing normally |
| Blinking green | Starting up, or no sun (e.g. at night) |
| Orange / yellow | Warning; may be a communication issue or a minor fault |
| Red | Fault; the system may not be producing |
| No lights | No power reaching the inverter; check breakers and disconnects |
These are general patterns only. Your manufacturer's manual is the authority for your model.
What to do with an error code
- Photograph the display and status lights.
- Write down the date, time and weather.
- Look up the code in the manufacturer's manual or support website.
- Contact the manufacturer or a qualified technician with the photo, model and serial number.
Don't
- Don't open the inverter cover.
- Don't repeatedly turn the system on and off.
- Don't spray water on or near the inverter.
Some errors clear on their own after a grid disturbance. If an error repeats or production stays down, schedule service.
Keep learning
- ArticleMy System Isn't Producing: First ChecksSafe, simple checks homeowners can do from the ground before calling for service.
- ArticleInverters, Microinverters and OptimizersThe three main inverter setups, how to tell which one you have, and what each means for service.
- ArticleProduction Is Lower Than ExpectedCommon reasons for lower solar output, and how to tell normal variation from a real problem.
- ArticleMonitoring Is OfflineWhy your solar app might stop updating, and how to reconnect it.