Monitoring Is Offline
Why your solar app might stop updating, and how to reconnect it.
1 min read · Educational information, not legal or financial advice
When your monitoring app stops updating, your system is often still producing. Monitoring and production are separate.
Common causes
- New router, internet provider, Wi-Fi name or password
- Wi-Fi signal too weak where the inverter or gateway is installed
- Internet outage
- Cellular monitoring plan expired (some systems use a cellular modem)
- Account access tied to a closed installer
How to check if it's still producing
- Look at the inverter's status light or display.
- Compare your utility bill: energy sent to the grid should continue on sunny months.
How to reconnect
- Find your inverter or gateway brand and model.
- Look up the manufacturer's Wi-Fi setup instructions. Many have a homeowner app that walks you through it.
- If the app requires an installer account, contact the manufacturer's support line and ask about homeowner access or transferring the system to a new installer.
Why it's worth fixing
Without monitoring, a problem can go unnoticed for months. Monitoring history is also helpful for warranty claims and when selling your home.
Keep learning
- ArticleSolar Monitoring: Your System's DashboardHow monitoring works, what to look for, and what to do if your app stops updating.
- ArticleMy System Isn't Producing: First ChecksSafe, simple checks homeowners can do from the ground before calling for service.
- ArticleInverter Lights and Error CodesWhat common inverter status lights usually mean and how to report an error to a technician.
- ArticleProduction Is Lower Than ExpectedCommon reasons for lower solar output, and how to tell normal variation from a real problem.